Capacity up to 600 Ton Double Girder Gantry Crane
Part 1 Descriptations:
Gantry cranes are an excellent alternative to permanent indoor overhead cranes, which minimal investment in any new building by eliminating the need for increased foundational and structural considerations. In addition, they can be disassembled and moved to a new location easily.
Double Girder Gantry cranes are widely used for moving objects within shipyards, ports, rail yards, factories, and warehouses.
Part 2: Detailed Configuration
-Double main girder, welded box beam
-Material: carbon steel with high quality of Q235B or Q345B
-The main girder is connected by strength bolt.
-Weld joint tested by X ray or ultrasonic examination;
-Forged Crane wheels
-Trolley with Compact structure, small size and light;
-Lifting mechanism is rigid open winch trolley
-Compacted gear motor driving, harden gear, hydraulic brake
-Excellent driving properties, smoothly moving
-Shot-blasting Sa2.5 for complete girder after welding, stress release
-Epoxy zinc rich high quality painting, 2x2 with 140μm
-Conductor power supply
-All hoist and crane movements are independent and can be run simultaneously.
-Protection degree IP55
-The components are positioned in a maintenance friendly way, and the whole layout provides with good protection
-Festoon cables are suspended on cable saddles, fixed to cable trolleys, running in a galvanized C-track.
- Overload Limiter, Limit Switch (Lifting and Traveling), Interlock protection device, Buffer, Rail clear plate, Protective cover, Bus Bar preventer plate, Anti-collision device, Light alarm devices Main isolating switch, Emergency stop system, Motor overload protection
-equipped with rainproof devices for lifting mechanism, electrical control box.
Part 3: Sketch & Technical Data
|Working duty||A5 (Intermediate)|
|Crab travelling|| ||38.5|
|Trolley travelling|| ||40.1||44|
|Max. wheel load||KN||370||370||380||420||430|
|Steel track recommended||QU80|
|Power source||3-Phase A.C. 380V 50Hz|